Need a little input - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Ahallman · 08-04-2022, 08:38 PM

Mods are
Btr stage 3
Supporting mods
Bbk 1 5/8" long tubes
No cats and factory h pipe and resonators
Vararam non tuned intake
Street tune

Rear bmr non adjustable lower control arms
Bmr adjustable toe rods
Bmr trailing arms
MT Street SS 275/40/20 factory air pressure

I went out tonight and launched pretty good. I didn't see what I got the rpm's to (ls3)
Here's my time slip. Someone tell me if it's a respectable time? I feel like it should be faster with this setup

HOJO · 08-05-2022, 07:27 AM

If you can lower that 60' time to maybe 1.80 or so you should be able to get in the mid to lower 12's I would think. Are you getting tire spin off the line by running factory air pressure setting? That seems like a lot of air if your coming out of the hole hard with a stick.

Ahallman · 08-05-2022, 09:13 AM

Quote:

Originally Posted by HOJO

If you can lower that 60' time to maybe 1.80 or so you should be able to get in the mid to lower 12's I would think. Are you getting tire spin off the line by running factory air pressure setting? That seems like a lot of air if your coming out of the hole hard with a stick.

That's at factory air pressure and no wheels spin. It's just an 1/8 mile track. I need an air tank so I can. Drop the pressure. I was thinking 20 or 22 psi.

08-04-2022, 08:38 PM	#1
Ahallman Drives: 2010 Chevrolet Camaro 2SS Join Date: Mar 2020 Location: Spartanburg, SC Posts: 38	Need a little input Mods are Btr stage 3 Supporting mods Bbk 1 5/8" long tubes No cats and factory h pipe and resonators Vararam non tuned intake Street tune Rear bmr non adjustable lower control arms Bmr adjustable toe rods Bmr trailing arms MT Street SS 275/40/20 factory air pressure I went out tonight and launched pretty good. I didn't see what I got the rpm's to (ls3) Here's my time slip. Someone tell me if it's a respectable time? I feel like it should be faster with this setup Attached Images

08-05-2022, 07:27 AM	#2
HOJO Drives: 2014 Camaro SS/RS 1LE 1967 Camaro Join Date: Oct 2013 Location: Fort Wayne, IN Posts: 873	If you can lower that 60' time to maybe 1.80 or so you should be able to get in the mid to lower 12's I would think. Are you getting tire spin off the line by running factory air pressure setting? That seems like a lot of air if your coming out of the hole hard with a stick.