You are browsing camaro5 
 |
|
02-05-2023, 07:49 AM
|
#1 |
         
|
Speedo Bezel re-install
When reinstalling the speedo bezel do you put the bezel clips in first or the rubber steering column cover ?
|
|
|
|
02-05-2023, 08:02 AM
|
#2 |
|
Valkyrie14
Drives: Chevrolet Camaro SS Join Date: Mar 2020
Location: Eau Claire, Wisconsin
Posts: 962
|
I slide everything in place but not pushed in all the way. Then I put the rubber shroud in place around the steering column. You will need a screwdriver or something like that to get the side of the shroud in place. Once all of the plugs are pushed in then you can press the rest of the bezel in place.
__________________
2014 SS LS3/LSA Supercharger, 10% Super Damper, 2.55 upper, AGP Dual Pump, ID 1050 injectors, Pegasus solid rear cradle bushings, LT Headers, Roto-Fab CAI, Elite E2 catch can, E85 corn fed, 160 Thermostat, Monster Twin Disk, MGW Short Throw shifter, Tick Clutch Master Cylinder, HP Tuners, JL Audio system.
|
|
|
|
|
02-05-2023, 08:22 AM
|
#3 |
|
|
Good info
 Thanks
|
|
|
|
|
02-06-2023, 10:09 AM
|
#4 | |
   
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,485
|
Quote:
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
 |
|
|
|
|
|
04-26-2023, 12:23 PM
|
#5 |
|
|
Did it by putting the rubber shroud in first then snapped the steering column cover in place then pushed the lower bezel tabs in then the side and upper bezel tabs
|
|
|
|
|
04-28-2023, 12:50 PM
|
#6 |
|
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,485
|
Awesome.
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
|
|
|
|
|
|
|
 |
|
|
