CAMARO6 - View Single Post

oldman · 01-08-2018, 04:43 PM

Does it matter if I start with a 9 or 9.5 wheel from a 2016 up SS to go to 11"? The widen wheel site says the weld in a one or two inch band. The 2015 and below SS wheel at 9" wide is much easier to come by. Also please post the offset.

01-08-2018, 04:43 PM	#1
oldman Drives: SS 6 speed of course Join Date: Jan 2016 Location: Hilo, HI Posts: 4,320	widen stock wheel question Does it matter if I start with a 9 or 9.5 wheel from a 2016 up SS to go to 11"? The widen wheel site says the weld in a one or two inch band. The 2015 and below SS wheel at 9" wide is much easier to come by. Also please post the offset. __________________ Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires. Last edited by oldman; 01-09-2018 at 12:37 PM.