The following steps show how one can raise the front passenger seat on a 2015 Camaro for better visibility.
1/ Unbolt the two star bolts that secure the seat sliding rails to the car frame with a T50 bit.
2/ Once the bolts are unscrewed, slightly slide the seat backward to unhook the rails from the car floor
3/ Use a flat screw driver to push the locking clip side way to unlock the electrical connector.
4/ Protect your door and door frame with blankets to prevent scratching the paint and lift the seat out of the car.
5/ Unbolt 6 bolts that secure the seat to the sliding rails
6/ Cut 4 pieces of 2"x2"x0.065" 3" length tubing and drill holes through them using a 5/16 drill bit as straight as possible
7/ Bolt the seat frame on to the sliding rails using grade 8 or better 3" length bolts and nuts with plastic locking insert
8/ Put the seat back in the reverse order as it was taken out of the car