[Destructo09]

I've done a little simple math based on these numbers, that wheel base is basically the same as the ATS Coupe.

The curb weight on the ATS coupe is 3461 Lbs in the RWD 3.6L V6 configuration.

This is the same V6 as the 5th gen Camaro and should way pretty much the same at about 345 lbs. The LS3 weighs about 460 lbs when it was in the Vette, it's the same motor so it should be very close.

Using these figures a v8 powered RWD ATS would weigh about 3538 lbs.

So, assuming the 6th gen Camaro will be on this 109" wheelbase it should be pretty close to the curb of the 2015 ATS plus weight of the V8.

Take that for what it is, but i'm expecting to see a 3500-3600 lbs Camaro.

I was able to find some specs on the LT1 weight wise and it looks to be only about 5 lbs heavier than a LS3, so my LS3 number should be pretty much correct.