|
Almost there
1. If you switch the headlights with the turn signal position and give it a little turn around
the corner ( couple inches ) while keeping the same shape , you may don't need the
side markers
2. Can you move the lower lights a little further to the corner , by extending the lower grille
to just short of the radius portion ( 2 ") and keeping the ends square , just like the one
above
3. You mention earlier the the trunk can't be made wider because of the wheel well , but
on the existing model , we open the trunk lid and there is some room beyond the lid to
outside , but that's not a big deal
4. On the hood , and by the same reason , it looks to me that it needs to be wider , closer
to the fenders edge , or it will cover the suspension tower , air cleaner etc
5 The exhaust as per your question , you are going to the fighter look
So it may be hidden just under the rear diffuser , cut just with the same angle off the
diffuser , and keep it in black or even with some kind of screen , and the shape of it
to mimic the geometrical vision of its surroundings
Just trying to make it not to standout from where it's in
|