Quote:
Originally Posted by EDFHOBBIES
It's me..
2 dive planes or kanards L & R
2 bezels L and R
1 lower spoiler or splitter
2 winglets on the end of splitter
1 upper grill
1 lower grill
Clips or plastic parts that push through to hold dive planes
6 screws to hold on winglets to end of spoiler
6 inserts called nuts but plastic inserts that push into lower splitter for the 6 bolts to attach winglets
Reuse your lower soft rubber parts on bottom of splitter. No need for a new one will need to drill old rivet from old one.
I gave my template to a friend for dive planes..
You also have a choice make a hole in fascia to attach the winglets into the fascia or trim tab off. The tab pushes through the fascia and same clips from dive planes hold it on.. I trimmed mine hit 150 many times no trunck failed or winglets failure yet.. was windy out to
I have extra set dive planes and some hard ware I'm not going to use.. I was going to cover mine in carbon fiber but not going to I am going to do mirrors in cf if I can find some cheaper than 150 used lol
|
Thanks! Can you please confirm that #18 is the clip that holds the dive plane? I seem to be missing 1. Perhaps, it broke. Also, will I be able to replace it thru the wheel well? It’s the uppermost one on the driver’s side.