CAMARO6 - View Single Post - WARNING: Front end Clunk - Loose Sway Bar Endlinks (please check yours)

ScottMZ3 · 10-04-2017, 04:38 PM

FYI, looks like there is an update to the service bulletin. They are now requiring replacement of the nuts instead of just re-torquing them as well as requiring locktight. I was told at the dealer today that it might be 1-2 weeks before the parts arrive because they are coming from a 3rd party vendor and not GM. Uhg. Perhaps these new nuts will prevent them from coming loose again though? The torque specs are also different than the previous bulletin. Here is a copy of the new bulletin (updated 09/15/17).

Its now PIC6276B:

10-04-2017, 04:38 PM	#108
ScottMZ3 Drives: 2018 ZL1 A10, 2019 BMW X5 Join Date: Dec 2016 Location: Roseville, CA Posts: 256	FYI, looks like there is an update to the service bulletin. They are now requiring replacement of the nuts instead of just re-torquing them as well as requiring locktight. I was told at the dealer today that it might be 1-2 weeks before the parts arrive because they are coming from a 3rd party vendor and not GM. Uhg. Perhaps these new nuts will prevent them from coming loose again though? The torque specs are also different than the previous bulletin. Here is a copy of the new bulletin (updated 09/15/17). Its now PIC6276B: __________________ 2018 Nightfall Gray Metallic Camaro ZL1 - A10 Purchased 9/23/2017 Last edited by ScottMZ3; 10-04-2017 at 10:34 PM.