CAMARO6 - View Single Post - Cammy

cellsafemode · 09-14-2016, 10:02 PM

Installed my MRT V1 axle back exhaust.

Here are some audio clips of the stock exhaust
Behind Car: https://drive.google.com/open?id=0B6...WJieUhtWVdZd1k
Driving: https://drive.google.com/open?id=0B6...klQZXUyQjNXME0
Driving 2: https://drive.google.com/open?id=0B6...lFEbVhhamVxTVk

Here are some after (i need another person to get some decent audio since the phone appears to be vibrating when driving around)

Behind Car: https://drive.google.com/open?id=0B6...UoxejVGTl9tWGs
Driving around (window down and up) : https://drive.google.com/open?id=0B6...Xk4UnFyaWxrQm8

The longest process was getting the 6 stupid hangers off. Also, the stock exhaust is heavy compared to the mrt.

Btw, I cut the exhaust with the following tool. Took literally less than 5 min to do both tubes and no deburring necessary.

https://www.amazon.com/gp/aw/d/B000M...?ie=UTF8&psc=1

And below are some installation pics. I think the right side is angled just a little off compared to the left so i'll have to man-handle that to adjust it.

09-14-2016, 10:02 PM	#10
cellsafemode Drives: 2016 Camaro 1LT Join Date: Jan 2016 Location: California Posts: 3,522	Installed my MRT V1 axle back exhaust. Here are some audio clips of the stock exhaust Behind Car: https://drive.google.com/open?id=0B6...WJieUhtWVdZd1k Driving: https://drive.google.com/open?id=0B6...klQZXUyQjNXME0 Driving 2: https://drive.google.com/open?id=0B6...lFEbVhhamVxTVk Here are some after (i need another person to get some decent audio since the phone appears to be vibrating when driving around) Behind Car: https://drive.google.com/open?id=0B6...UoxejVGTl9tWGs Driving around (window down and up) : https://drive.google.com/open?id=0B6...Xk4UnFyaWxrQm8 The longest process was getting the 6 stupid hangers off. Also, the stock exhaust is heavy compared to the mrt. Btw, I cut the exhaust with the following tool. Took literally less than 5 min to do both tubes and no deburring necessary. https://www.amazon.com/gp/aw/d/B000M...?ie=UTF8&psc=1 And below are some installation pics. I think the right side is angled just a little off compared to the left so i'll have to man-handle that to adjust it. Attached Images Last edited by cellsafemode; 09-15-2016 at 01:48 AM.