Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

bsn · 02-23-2024, 06:45 AM

Talk to whoever built the engine as far as oil viscosity-if the bearings are set up with tight clearances you don't want too thick of an oil. Also depending on the builder they may want you to run a conventional or break in oil for first change.

02-23-2024, 06:45 AM	#3
bsn Drives: 2013 ZL1 Join Date: Sep 2021 Location: Virginia Posts: 328	Talk to whoever built the engine as far as oil viscosity-if the bearings are set up with tight clearances you don't want too thick of an oil. Also depending on the builder they may want you to run a conventional or break in oil for first change.