|
I have not done this myself and actually don't mind stock-ish settings, but here is where you need to experiment. The "Exh Value RPM thresholds" table defines RPM bands 1 to 4 that will in turn be used by the separate open and close percentage tables in each mode (these allow for hysteresis).
Not 100% sure, but I think mode 0 is tour/snow, mode 1 is sport and mode 2 is track. A value of -1 in these tables means the valves are fully open and 100 means fully closed.
It's not as simple as an on/off switch, but I quite like the nuanced approach, wish some of this configurability was lifted up into infotainment config screens.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq
Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods
JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune
1100 - 1/30/18 | 2000 - 1/31/18
3000 - 2/06/18 TPW 2/26/18
3400 - 2/19/18 | 3800 - 2/26/18
4300 - 2/27/18 | 4B00 - 3/01/18
4200 - 3/05/18 | 4800 - 3/14/18
5000 - 3/16/18 | 6000 - 3/19/18
Last edited by arpad_m; 09-14-2022 at 02:26 PM.
|