Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Chevy Camaro vs... (https://www.camaro5.com/forums/forumdisplay.php?f=51)
-   -   2015 1LE vs 2013 Bolt on SS (https://www.camaro5.com/forums/showthread.php?t=383288)

damian559 11-03-2014 02:13 PM

2015 1LE vs 2013 Bolt on SS
 
I raced a 2013 SS M6 with shorties, intake, and exhaust from a 20 roll and 40 roll and took him by a car each time. Easy $200 for me.

MRREVINTO7 11-03-2014 02:26 PM

i have a 1LE also ..the roll is in your best interest due to the trans ratios. even though you have 391 rear ratio .1le has 2.66 1st
1.78 2nd 1.30 3rd vs the ss gearing ...3.01 1st 2.07 2nd 1.43 3rd ...

MRREVINTO7 11-03-2014 02:37 PM

my friend has a 2010 with all the same mods as me in my 1LE except he has weld wheels and we both have 3.91s our cams are almost identicle except i have 113 lobe he has 115...he makes 457rwhp400tq same specs..
vs my 472-424... when we go from dig I'm trailing a full car ..when we roll 50 or below its nose to nose he edges me sometimes 1/8 car his car is 200lbs less and everytime we ran i had a regular wheel and 125b passenger ...but if we go from 60 i can pull away ..good runs though ..have fun and be safe ..we did this on old air strip 1.5 miles long

TXLS3 11-19-2014 04:56 PM

No videos?

45thAnniversary2SS 11-19-2014 05:01 PM

Quote:

Originally Posted by damian559 (Post 8043332)
I raced a 2013 SS M6 with shorties, intake, and exhaust from a 20 roll and 40 roll and took him by a car each time. Easy $200 for me.

Well shorties suck so basically same power. Why is that surprising?

rontammy0 11-19-2014 05:04 PM

We need video of every race posted......shorties need hi flow cats to work well.

45thAnniversary2SS 11-19-2014 05:07 PM

If anyone around here wants to try same thing against long tubes let me know. I'm your huckleberry.

rontammy0 11-19-2014 05:11 PM

Quote:

Originally Posted by 45thAnniversary2SS (Post 8072321)
If anyone around here wants to try same thing against long tubes let me know. I'm your huckleberry.

If camarofest is in North Carolina this year I'm going to really try to make it down.....then we can do the shorty with hi fllows vs ...long tubers. Even if you beat me your still going to buy me a shitty American beer for my troubles. :biggrin:

45thAnniversary2SS 11-19-2014 07:41 PM

Quote:

Originally Posted by rontammy0 (Post 8072325)
If camarofest is in North Carolina this year I'm going to really try to make it down.....then we can do the shorty with hi fllows vs ...long tubers. Even if you beat me your still going to buy me a shitty American beer for my troubles. :biggrin:

:happy0180: deal

rontammy0 11-20-2014 06:59 AM

Quote:

Originally Posted by 45thAnniversary2SS (Post 8072654)
:happy0180: deal

:thumbsup:

damian559 11-22-2014 02:46 PM

Quote:

Originally Posted by TXLS3 (Post 8072310)
No videos?

It's bad quality and hard to see.

Snidely Whiplash 11-24-2014 01:47 AM

Quote:

Originally Posted by MRREVINTO7 (Post 8043394)
my friend has a 2010 with all the same mods as me in my 1LE except he has weld wheels and we both have 3.91s our cams are almost identicle except i have 113 lobe he has 115...he makes 457rwhp400tq same specs..
vs my 472-424... when we go from dig I'm trailing a full car ..when we roll 50 or below its nose to nose he edges me sometimes 1/8 car his car is 200lbs less and everytime we ran i had a regular wheel and 125b passenger ...but if we go from 60 i can pull away ..good runs though ..have fun and be safe ..we did this on old air strip 1.5 miles long

Cams are NEVER almost identical as the ramp profile has no spec. Were they both installed straight up or advanced/retarded? Are the rocker arms the same? There are a host of things that make every cam unique. That said, I've never run any camshaft that was not custom ground as nobody wants to use their car in the same manner, nor does that car have the same mods to perform your unique tasks.

Taco Time 11-24-2014 08:39 AM

Quote:

Originally Posted by damian559 (Post 8043332)
I raced a 2013 SS M6 with shorties, intake, and exhaust from a 20 roll and 40 roll and took him by a car each time. Easy $200 for me.

Alright, somebody educate me here. I was to understand that the 1LE is an SS with track add-ons. It has 3.91 gears? (just trying to understand what makes it faster in a straight line than an SS.) thanks.

MightymouseSS 11-25-2014 04:32 AM

Quote:

Originally Posted by Taco Time (Post 8079571)
Alright, somebody educate me here. I was to understand that the 1LE is an SS with track add-ons. It has 3.91 gears? (just trying to understand what makes it faster in a straight line than an SS.) thanks.

Technically the 1le is only a tenth quicker on the 1/4 mile than the SS from what I seen on car and driver and motortrend. I'd think mainly due to the better tires and gears.


All times are GMT -5. The time now is 05:02 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.