Warpig gets new wheels for autocross, does not slow down at dragstrip.
All last year I was running the weld RTS 20s. I sold them and decided I wanted a new look for the car..
I ordered a set of Rohana RC 22's.. I put 275 up front and am still running the 30535 20 mickeys out back.. now I have seen all the wheel and tire threads and I am always chiming in saying that the zl1 (esp auto) does not need a 17 or 18 iin wheel and tire to run a number.. and in most cases you will slow the car down.. the new wheel and tire setup proves my point. http://i285.photobucket.com/albums/l...ps624351cb.jpg this new setup is 80#s heavier than my welds overall and I figured with the new fronts being so wide the car would deff see a reduction in 60' and or trap and e.t... nope.. the car on a very very conservative tuneup (about 100 hp wheel less than at Bowling green for ls fest ) went a staggering 10.2 at 134 ON A NO PREP night at gateway over the weekend.. http://i285.photobucket.com/albums/l...psb6fcd3e4.jpg as you can see the 60 was a little weak compared to the cars usual but the track was literally unprepped and had been getting raped by moms minivans and front drive Hondas all night... http://i285.photobucket.com/albums/l...ps6fd8ed77.jpg the best part is the car is turned way down because im getting ready to put a turbo on it. this just shows that you don't need to ruin your cars handling or make change a bunch of suspension to get it to work... I plan on turning the car back up to the same level as it was at BG last year and see if I can get the car to go 9s on what is basically the setup I plan on autocrossing it with..just a tire pressure change... |
Damn I love those wheels! More pics pleases.
|
I can't find a tire that size on there site.
|
Mickey Thompson 305 35 20 et2
|
I was there Saturday night too, but I didn't realize that was you with new wheels. Your ZL1 was moving, but I had no idea you were running low 10's. I couldn't get a decent time to save my life that night and my 60' sucked too. Glad you had some good runs!
|
All times are GMT -5. The time now is 05:23 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.