Official Wheel Thread? I Need To See Options!
Hey Guys,
I haven't seen many posts of pics of the 6th Gen with aftermarket wheels or wheel mods. I have a black 2SS and want some matching black wheels but I need to see what's out there first. If you've gotten new wheels, or seen pics of the 6th Gen with different wheels or wheel mods, post the pics here! http://s16.postimg.org/je4v1bsyd/IMG_6766.jpg |
1 Attachment(s)
I got the same black 2SS and put the M228's on it, I really like them.
|
1 Attachment(s)
228
|
Quote:
http://www.camaro6.com/forums/forumdisplay.php?f=227 |
I like this...a thread to showcase everything. Bring it on boys n girls.
|
I am researching these wheels in gloss powdercoat gunmetal - will use Ben at WeaponX, there is no one better...
http://i67.photobucket.com/albums/h3...AEEE456576.png |
Quote:
|
MRR M228 wheels Camaro SS first ever !!!
8 Attachment(s)
bybcous thank you for your time and for getting this photo session all squared away, I wish there where more up front people as you, it would make our industry 10 times better :thumbup:
Here it is guys 2016 Camaro SS Attachment 773255 Attachment 773256 Attachment 773257 Attachment 773258 Attachment 773259 Attachment 773260 Attachment 773261 Attachment 773262 |
Man my car with those black wheels look sexy! lol
|
I'm thinking about getting my stock wheels painted matte black for now, I just haven't seen a set of wheels that I like enough. I would prefer a lip on the back, all black, matte or high gloss black, and wide.. but haven't found that combination yet
|
http://farm3.staticflickr.com/2809/1...20067f19_o.jpg We know you have been waiting, but yes, we have fitment information and photos for you here on the FlowForm FF15 Wheels for your 6th Gen Camaro!! Below we have a selection of some photos during the test fit, then final installation shots so you can see how they sit on this chassis ;) 19x10 ET25 front fitment https://c2.staticflickr.com/2/1493/2...996cf0eb_o.jpg 19x10 ET25 front fitment https://c2.staticflickr.com/2/1668/2...3bbd6f32_o.jpg 19x10 ET25 front fitment https://c2.staticflickr.com/2/1605/2...c80e63b8_o.jpg 20x10 ET33 front fitment (requires 5mm spacer up front) https://c2.staticflickr.com/2/1634/2...357fb30f_o.jpg 20x11 ET45 rear fitment https://c2.staticflickr.com/2/1678/2...db6fdf55_o.jpg 20x11 ET45 rear fitment https://c2.staticflickr.com/2/1446/2...952be0c5_o.jpg Installed - 20x9 ET25 front 20x10 ET33 rear https://c2.staticflickr.com/2/1533/2...bba5c5da_b.jpg https://c2.staticflickr.com/2/1656/2...e4aea664_b.jpg https://c2.staticflickr.com/2/1655/2...cb090e27_b.jpg https://c2.staticflickr.com/2/1569/2...277b5867_b.jpg https://c2.staticflickr.com/2/1662/2...a84dd5a0_b.jpg Available Fitments: Front: 19x10 ET25 - 23.8lbs Each - (Requires 3mm spacer up front to clear strut) Rear: 19x10 ET25 - 23.8lbs Each Front: 20x9 ET25 - 23.2lbs Each Rear: 20x10 ET33 - 24.4lbs Each Front: 20x9 ET25 - 23.2lbs Each Rear: 20x11 ET45 - 25.2lbs Each Front: 20x10 ET33 - 24.4lbs each (Requires 5mm spacer up front to clear strut) Rear: 20x11 ET45 - 25.2lbs Each Thank you for taking a look, give us a shout if you have any questions! |
Quote:
|
Quote:
|
Putting this wheel on right now with a bit bigger tire...pics later today
Niche Targa Black/machined http://i67.photobucket.com/albums/h3...D43F54ACEC.jpg |
Quote:
|
http://i67.photobucket.com/albums/h3...82E7EB2D69.jpg
Niche Targa machine face tint 20 x 9 20 x 10.5 Et 15 35 + 3mm spacer in rear Nitto Invos 275/35/20. 295/35/20 |
Quote:
|
Looks really good Glen! I remember you telling me this time not going to do rims. LOL funny how it is so hard to resist. Although it looks really nice and I am sure you feel rewarded by the new look!
|
Quote:
|
Quote:
|
No, but i found the niche wheels local in stock, and in person I like the design more than the 360 design, which was going to be several hundred more per wheel…there were 11 diff wheels that were evaluated before I made my decision. CarId.com had a good confgurator/database for chosing.
|
Quote:
http://s20.postimg.org/iueeriqml/IMG_1870.png I got my stock wheels done in matte black for now, seen below: http://s20.postimg.org/nrrzcmslp/rocsy.jpg |
Very, very Nice.
|
Quote:
Legalities? And what about doing the lower running lights? |
Quote:
|
bump
|
Quote:
Quote:
That photo may or may not be a photoshop, but I know there is one set in existence...I ordered them that way for the show car group, for the BLACK Sema car. Looks awesome. If it were possible, I'd definitely make it switchable from white to red and tie that switch to the nitrous master switch. That would be badass!! |
Quote:
I'm not sure about the legality or ease of install (probably just a new headlight unit, non-DOT approved)... but I've seen plenty of cars with different colored running lights (and headlights). |
What I'm getting at is with these lamps, you can not modify the factory units. It'll have to be a complete aftermarket setup.
|
2 Attachment(s)
Freinds car
|
Quote:
|
Quote:
|
Quote:
|
Quote:
|
Got these ordered in gold. Sadly it'll be probably a month or so before I receive them.
http://www.planet-9.com/attachments/...achment-1-jpeg |
Excited to see more of these photos of the FlowForm FF01 in Tarmac!
https://c2.staticflickr.com/2/1588/2...037fb6a6_b.jpg https://c2.staticflickr.com/2/1517/2...f0c69b42_b.jpg https://c2.staticflickr.com/2/1581/2...2e9f4732_b.jpg |
Zl1 rims
|
2 Attachment(s)
Hmzz
|
Quote:
|
Quote:
|
All times are GMT -5. The time now is 09:35 AM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.